SCTE-HE-DIGITAL-COMMON-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY
        FROM SNMPv2-SMI
    DisplayString, DateAndTime
        FROM SNMPv2-TC 
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    entPhysicalIndex
        FROM ENTITY-MIB
    heDigital
        FROM SCTE-HMS-HEADENDIDENT-MIB  -- see SCTE 38-11 (formerly HMS114)
    HeClockSource, HeResetValue, HeTenthCentigrade 
	  FROM SCTE-HMS-HEADENDIDENT-TC-MIB; 

heDigitalCommonMIB MODULE-IDENTITY
    LAST-UPDATED    "200807210000Z "
    ORGANIZATION    "SCTE HMS Working Group"
    CONTACT-INFO    "SCTE HMS Subcommittee, Chairman 
                     mail to:  standards@scte.org "

    DESCRIPTION
            "The MIB module is for representing general information
            about HeadEnd Digital equipment present(or indoor)
            and is supported by an SNMP agent. heDigital is supported in 
            HMS114R11.mib (SCTE 38-11)"

	REVISION "200807210000Z"
	DESCRIPTION 
         "Updated file with Comments from meeting 7/9/08
1. Update IMPORTS clause to reference:
 SCTE-HMS-HEADENDIDENT-TC-MIB for HeTenthCentigrade
 Remove Integer32."

	REVISION "200806100000Z"
	DESCRIPTION 
         "Added tree branches for MPEG and QAM so MIB would parse with 
	   any compiler."

	REVISION "200712180000Z"
	DESCRIPTION 
         "Modifications due to voting comments
		1. Reordered MIB tree to fit under the heDigital branch.
		2. Took out unused imports.
		3. added temperature.
		4. added compliance statement and made everything optional."

	REVISION "200709250000Z"
	DESCRIPTION 
         "Took out everything except the most basic place holders for future
          additions."
    ::= { enterprises scteRoot(5591) scteHmsTree (1) insidePlantIdent (11) heDigital(5) 2 }

heDigitalCommonMIBObjects OBJECT IDENTIFIER ::= {heDigitalCommonMIB 1 }
heDigitalQAM OBJECT IDENTIFIER ::= {heDigital 3 }
heDigitalMPEG OBJECT IDENTIFIER ::= {heDigital 4 }

-- MIB contains 3 groups
heDigitalCommonConfig  OBJECT IDENTIFIER ::= { heDigitalCommonMIBObjects 1 }
heDigitalCommonStatus  OBJECT IDENTIFIER ::= { heDigitalCommonMIBObjects 2 }
heDigitalCommonAlarms  OBJECT IDENTIFIER ::= { heDigitalCommonMIBObjects 3 }
heDigitalCommonLog       OBJECT IDENTIFIER ::= { heDigitalCommonMIBObjects 4 }



--  The Common Tables

heDigitalCommonClockTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HeDigitalCommonClockEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing information about headend (or indoor)
            equipment."
    ::= { heDigitalCommonConfig 1 }

heDigitalCommonClockEntry OBJECT-TYPE
    SYNTAX      HeDigitalCommonClockEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Information about particular headend equipment."
    INDEX       { entPhysicalIndex }
    ::= { heDigitalCommonClockTable 1 }

HeDigitalCommonClockEntry ::= SEQUENCE {
    heDigitalCommonTime	DateAndTime,
    heDigitalCommonClockSource	HeClockSource
}

heDigitalCommonTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
            "Real time clock value for this module."
    ::= { heDigitalCommonClockEntry 1 }

heDigitalCommonClockSource OBJECT-TYPE
    SYNTAX      HeClockSource
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
            "Real time clock source for this module."
    ::= { heDigitalCommonClockEntry 2 }



heDigitalCommonResetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HeDigitalCommonResetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing information about headend (or indoor)
            equipment."
    ::= { heDigitalCommonConfig 2 }

heDigitalCommonResetEntry OBJECT-TYPE
    SYNTAX      HeDigitalCommonResetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Software / Hardware Reset of a specific Entity."
    INDEX       { entPhysicalIndex }
    ::= { heDigitalCommonResetTable 1 }

HeDigitalCommonResetEntry ::= SEQUENCE {
    heDigitalCommonSoftwareReset	HeResetValue,
    heDigitalCommonHardwareReset	HeResetValue,
    heDigitalCommonWarmReset       HeResetValue
}

heDigitalCommonSoftwareReset OBJECT-TYPE
    SYNTAX      HeResetValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
            "All running Software will reset. This function will initiate 
             a cold start trap depending on the device. Software reset
             functions will be vendor specific."
    ::= { heDigitalCommonResetEntry 1 }

heDigitalCommonHardwareReset OBJECT-TYPE
    SYNTAX      HeResetValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
            "The Hardware for this device will reset. This function will initiate 
             a cold start trap from the device."
    ::= { heDigitalCommonResetEntry 2 }

heDigitalCommonWarmReset OBJECT-TYPE
    SYNTAX      HeResetValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
            "All running Software will reset. This function will initiate 
              a warm start trap on the device. Software reset
             functions will be vendor specific. No configuration parameters
             can change during a Software Warm Start."
    ::= { heDigitalCommonResetEntry 3 }


heDigitalCommonTempTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HeDigitalCommonTempEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing information about headend (or indoor)
            equipment temperature values."
    ::= { heDigitalCommonStatus 1 }

heDigitalCommonTempEntry OBJECT-TYPE
    SYNTAX      HeDigitalCommonTempEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Information about particular headend equipment."
    INDEX       { entPhysicalIndex }
    ::= { heDigitalCommonTempTable 1 }

HeDigitalCommonTempEntry ::= SEQUENCE {
    heDigitalCommonTemperature                 HeTenthCentigrade
}

heDigitalCommonTemperature OBJECT-TYPE
    SYNTAX      HeTenthCentigrade
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
            "Temperature measured inside the headend equipment.

            This object must provide for the alarm management capabilities
            with a corresponding entry in the propertyTable of
            SCTE-HMS-PROPERTY-MIB (HMS026).

            An alarm shall be recorded as an entry in the currentAlarmTable
            of SCTE-HMS-PROPERTY-MIB (HMS026).  

            A log record shall be added as an entry in the heCommonLogTable.

            An heCommonAlarmEvent notification shall be sent."
    ::= { heDigitalCommonTempEntry 1 }


-- Conformance information
heDigitalCommonConformance OBJECT IDENTIFIER ::= {heDigitalCommonMIB 2 }
heDigitalCommonCompliances OBJECT IDENTIFIER ::= { heDigitalCommonConformance 1 }


heDigitalCompliance  MODULE-COMPLIANCE
	STATUS     current
	DESCRIPTION 
		"These objects describe the support level for QAM."
	MODULE
		GROUP heDigitalConfigGroup
		DESCRIPTION 
			"The heDigitalConfigGroup is unconditionally optional"
		GROUP heDigitalStatusGroup
		DESCRIPTION 
			"The heDigitalStatusGroup is unconditionally optional"
	::= { heDigitalCommonCompliances 1 }

-- MIB Groupings
heDigitalCommonGroups OBJECT IDENTIFIER ::= {heDigitalCommonConformance 2}

heDigitalConfigGroup  OBJECT-GROUP
	OBJECTS { heDigitalCommonTime,heDigitalCommonClockSource, heDigitalCommonSoftwareReset,
    heDigitalCommonHardwareReset, heDigitalCommonWarmReset}
	STATUS     current
	DESCRIPTION 
		"Configuration that is common to network devices."
	::= { heDigitalCommonGroups 1 }

heDigitalStatusGroup  OBJECT-GROUP
	OBJECTS { heDigitalCommonTemperature  }
	STATUS     current
	DESCRIPTION 
		"Status that is common to network devices."
	::= { heDigitalCommonGroups 2 }

END